Stage-2 “up-grade

If and when you decide to increase your boost by reducing the Supercharger Pulley (Please Note!)


“Increasing Boost above the 5 lb mark will (quickly) increase the temperature of the air leaving the supercharger”


You will need to cool this discharge air and a good option is to install a “water/meth injection system” or an “inter-cooler”. Currently a revised inter-cooler is in the design stages “again”. The previous design used a copper heater core “and it was found that it did not hold up with heavy use at the drag strip. The test vehicle was John Staas 1998 Explorer.     

I am currently working on a heavy duty “Aluminum” water/air exchanger designed “specifically” for the task at hand. Until design and testing is completed we offer the “DevelsOwn” water/meth injection kit.   

This kit contains all the same quality parts as our highly popular progressive alcohol/water kit but without the controller. Instead, a boost pressure switch activates this kit.

If you want for the benefits of having an alcohol/water kit of the highest quality and reliability at a price that is accessible to just about everyone—this kit is perfect.

The DevilsOwn water methanol injection kit suppresses detonation caused by the high temperature and pressure developed within the combustion chamber when the effective push-to-connect ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger.

Cool the air with the alcohol/water injection kit! Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern, lean burn engines. Methanol, with its 116 octane and high flash point and specific gravity, further reduces the chances of detonation.

This kit contains all the same quality parts as our highly popular progressive alcohol/water kit but without the controller. Instead, a boost pressure switch activates this kit.

If you want for the benefits of having an alcohol/water kit of the highest quality and reliability at a price that is accessible to just about everyone—this kit is perfect.

The DevilsOwn water methanol injection kit suppresses detonation caused by the high temperature and pressure developed within the combustion chamber when the effective push-to-connect ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger.

Cool the air with the alcohol/water injection kit! Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern, lean burn engines. Methanol, with its 116 octane and high flash point and specific gravity, further reduces the chances of detonation.


The Benefits of Water-Methanol Injection:

System Contents Include:

Important Notes: Basic hand tools are required for installation.



Copyright © Banshee Supercharger, Inc.

We are able to keep costs down by designing around the Eaton M90 3rd generation supercharger that was used in the Ford T-Bird “supercoupe” from 1989 to 1995. The inlet (must) be the oval as in late 1995 Ford went to a rectangular that is (not) “compatible” with this kit.

Banshee Supercharger Inc Website

We

W

The Supercharger can be found on Ebay, Craigs List, or your local wrecking yard at a cost of $200 to $350.

Where can I purchase the Supercharger?

Customer Questions and answers

A Supercharger Kit Designed For

The Ford 4.0L Single Overhead Cam Engine.

This kit (less) Supercharger has been in production since June 22 2005

What Supercharger is required?